Trapdoor Oddities

Trapdoor Oddities

UNISSUED MODEL 1888 RIFLE TOOL SET


Sold M88 tool sets are very hard to find. In this case we have an unissued set which is extremely rare. $175 + S/H.

Contact Al Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.



45-70 SCABBARD ROSETTES


The rossettes are for mounting on the frog of the scabbard. The first two are real and the others were produced in the 1970's by someone hoping to sell the rarer rosettes at a high profit. Unfortunately, the quality of the reproductions was not very good, so sales were not as expected. Originals - $10 each and the Reproductions are $3 each.+ S/H.

Contact Al Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.



45-70 RIFLE BARRACKS WOOD CLEANING RODS


SoldThese rods were strictly for barracks cleaning and are made for cleaning a rifle barrel. They are made of oak or ash and are a little wavy. Two for $30 shipping included.

Contact Al Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.





MODEL 1876 TOOLS FOR THE MCKEEVER POUCH


These tools are not commonly found and fit in the pocket of the various McKeever cartridge boxes produced. They are in excellent condition and are $35 each or two for $60 + S/H.


Contact Al Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.




Three M80 Hunting Knives and Scabbards


FIRST: SN837 Excellent condition, early scabbard. $485 + S/H
SECOND: SN2636 Excellent condition, hook scabbard. $485 + S/H
THIRD: SN766 Excellent condition, hook scabbard. $485 + S/H
Contact Al Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.





Taps for Trapdoors


These three taps are for all the threaded holes found in a 50-70 or 45-70 Springfield except the tang hole in the trigger plate.
Tap sizes: (Whitworth)
5/32"- 26TPI (Sight)
3/16"- 26 TPI (Sear & Bridle)
7/32"- 26TPI (Tang Bolt)
Cost for the set of three is $65 which includes postage in the USA
Contact Al Frasca at 937-399-5002 or e-mail him at: afrasca@erinet.com.





Return to Parts Listings